Пожалуйста, поверните Ваше устройство! (И наслаждайтесь лучшей презентацией наших продуктов)

Все категории

Surplex

— 3 244
Сортировать по:
  • TEN BRINK BBL 12/2,5 Band-Blancheur
    • Фиксированная цена

    TEN BRINK BBL 12/2,5

    Германия | Boxberg


    Serial No.: 166, for food products (such as beetroot), product weights approx. 500 g, stainless steel version, machine dimensions approx. 13000 x 2700 x 2000 mm, disposal- and discharge height 950 mm, modular belt ALFA BELT S 2400, width 2550 mm, length 28000 mm, chain wheel S 2400 SEW bevel wheel-gear motor KA 87/TR 57, steam regulator with drive BÄLZ 340 B, steam trap GESTRA UNA 23, dirt trap GESTRA DN 50 PN 16, steam regulator, magnet valve BÜRKERT, screw-in thermometer PT-100, manometer D 63, 3-rod sensor, stainless steel control cabinet, attention: extra-wide transport and loading with truck crane necessary !

  • Вертикальный обрабатывающий центр PINACLE QV 159
    • Фиксированная цена

    PINNACLE QV 159

    Испания | Sant Esteve Sesrovires


    PINNACLE QV 159 Vertical Machining Centre Auto Tool Changer (RANDOM) Spindle cone ISO40 Type of retention knob BT40 / CAT40 Max. Tool diameter 100 mm Max. Tool Lenght 250 mm. Max. Tool Weight 8 Kgs. Power / Potencia Servo motor (X- Axis) Fanuc Alpha 22/3000i / 4,0Kw Servo motor (Z- Axis) Fanuc Alpha 22/3000i / 4,0Kw Turret rotation Fanuc Alpha 22/3000i / 4,0Kw

  • API RADIAN LASER TRACKER Laser Measuring Device Lasertracker
    • Фиксированная цена

    Api RADIAN LASER TRACKER

    Германия | Albstadt


    API RADIAN LASER TRACKER Laser Measuring Device Scope of supply: Radian (R-20n) Tracker Kit with tripod and Carrying Case - Hard Shell (with wheels) Magnetic instrument stand - short - for Gimbal 1 x 1.5 Sphere Mount - 25 mm Offset, 12 mm Shank - Negative 1 x 1.5 Edge Sphere Mount-2 - 25 mm Offset 1 x 1.5 Shankless Sphere Mount - 25 mm Offset 4 x 1.5 Sphere Mount - Temporary Mount 2 x SMR - 1.5'' Diameter - Break Resistant Hollow Core 50 m Software "Spatial Analyzer" Professional by New River Kinematics On request delivery with new calibration certificate! Set of cables For further technical information please see attached PDF-sheet.

  • Инфо-рассылка "Surplex"

    Подпишитесь и получайте обновления о новых продуктах. НЕ СПАМ!

    Ура! Подписка выполнена успешно.

    Ура! Чтобы подтвердить Вашу подписку, нажмите на ссылку, которую мы отправили в электронном письме.

  • HOEFLER H - 4000 Maxima Gear Grinding Machine
    • Фиксированная цена

    Hofler H - 4000 Maxima

    Соединенные Штаты | Washington


    HOEFLER H - 4000 Maxima Gear Grinding Machine Machine equipped with balancing device REutlinger and gear measuring system Klingelnberg TPF 40, hydraulic unit, coolant filtration and oil mist extraction system

  • WEEKE Optimat BHC 550 Обрабатывающий центр с ЧПУ
    • Фиксированная цена

    Weeke Optimat BHC 550

    Германия | Duisburg


    WEEKE Optimat BHC 550 CNC Machining Center with Laser position system for vacuum clamps and groove saw aggregate at X-direction.(Delivery without tools and aggregates! Please note that the transport of the dismantled machine requires a transport rack supplied by WEEKE which incurs costs of EUR 900,-- plus VAT. After the transport rack has been returned to Surplex, this amount minus a value deduction of 10 % will be refunded.)

  • HANS SCHÖN UNH 65 Hydr. Двухстоечный пресс
    • Фиксированная цена

    Hans Schoen UNH 65

    Германия | Wermelskirchen


    HANS SCHÖN U - NH 65 Hydraulic Press 2 column version pressing piston 230 mm 3 grooves - 22 mm (350 Diagonal) thickness of clamping plate 80 mm installation height 600 mm Ram 490 x 280 (diameter pin 40 mm / H7 x 130 deep) I pump 11KW II pump 22KW Press Log Book and Documentation Available Accident prevention regulations (UVV)

  • NILES-MAGDEBURG DxP 3/3 x 20000 Тяжелый токарный станок
    • Фиксированная цена

    Niles DxP 3/3 x 20000

    Германия | Duisburg


    We offer a MAGDEBURG DxP 3/3 x 20000 Heavy Duty Lathe for high quality standards.Technical details:- Turning diameter in gap 3500 mm- 3 steady rests- 2 carriages- main motor 50 kW

  • OTT M 259-FÜ ÐšÑ€Ð¾Ð¼ÐºÐ¾Ð¾Ð±Ð»Ð¸Ñ†Ð¾Ð²Ð¾Ñ‡Ð½Ñ‹Ð¹ станок with Return coneying system
    • Фиксированная цена

    Ott GmbH M 259-FÜ

    Германия | Duisburg


    OTT M259FÜ Edgebanderwith te following equipment:1. pre-milling unit 2 x 1.5 HP2. automatic cutting device 0,2 - 3 mm3. Doble-end trmming unit 2 x 0,6 kW4. Top and bottom trim station5. Fine trimming station for to/bottom bevel trimming 0 - 3 mm6. Radius trim station 2 x 0,6 HP, swiveable 0-45°7. corner rounding station 4 x 0,35 kW8. Scraping unit 3 mm radius9. Buffing unit10. return conveying system Ligmatech Boomerang ZHR15Please note that the date of delivery is an expected date that depends on the delivery of a new machine!

  • SCHÄFER SRMV 3Roll-Вальцовочный станок
    • Фиксированная цена

    Schäfer SRMV

    Германия | Neuss


    The machine is particularly suitable for short and straight prebending. In this machine, the upper roller and the side rollers can be adjusted. With additional exchange roller 230 mm Diameter, documentation (without electric-plan). In 2014, the mechanical folding stock was converted from a factory mechanic on hydraulic drive. More information can be found in the PDF attached.

  • STEFANI Major/Flex Кромкообрабатывающий станок
    • Фиксированная цена

    Stefani Major/Flex

    Италия | Follina


    STEFANI Major/Flex Double-sided Edge Banding Machine consisting of: 1st. Machine, doubel sided, type MAJOR - Chipping unit equipped with: - horizontal chipper 3,5 kW - vertikal chipper top and bottom each 4 kW - chipper swiveable 4 kW - milling unit vertical 2 x 1,8 kW - milling unit vertical 2 x 1,8 kW - 12-time edge magazine - melting unit GR_HM-P - pressure zone with Softforming unit - snipping unit YU1000 - milling unit R97, 2 x 1,03 kW - milling unit, swiveable RSU97, 2 x 0,56 kW - Universal milling vertical 5,5 kW - Universal milling horizontal 5,5 kW - Profile scraper RCS97 - Flat scraper RCA - buffing unit SPO - turning station MAHROS OP DC/A, year 1999 2nd. machine Type Major/Monomatic - Double sided chipping unit: - chipper horizontal 3,5 kW - chipper vertical top/bottom each 3,5 kW - 12-time edge magazine - melting unit LMS - snipping unit - rough trimming 2 x 1,03 kW - profile trimming (swiveable) 2 x 0,56 kW - 4 milling units each with 4 x 0,35 kW - Universal milling, swiv

  • SAPIENS MS1 2003 TOP LINE A5 Обрабатывающий центр с ЧПУ
    • Фиксированная цена

    sapiens MS1 2003 TOP LINE A5

    Германия | Münster


    compact machine on a few m² automatic production of complete frames , doors and door frames in one-man operation Centre solo or in production line useable automatic processing of 6 sides versatile and flexible strecherfree end profiling efficient processing sequence high precision Low noise low power consumption

  • Строгально-калевочный станок KUPER SWT XL
    • Фиксированная цена

    Kuper SWT

    Германия | Rietberg


    ***** Exhibition machine ***** Specifications: Working width (with tool diameter 125 mm) 15-230 mm Working height (with tool diameter 125 mm) 10-150 mm 1. SPINDLE: HORIZONTAL BOTTOM Engine with electronic brake 5,5 kW (7.5 hp) Diameter 40 mm Spindle length 255 mm Quick nut "Pro-Lock" 2. Spindle: VERTICAL RIGHT Engine with electronic brake 5.5 kW (7.5 hp) Diameter 40 mm Spindle length 170 mm Displacement axial 80 mm Quick nut "Pro-Lock" 3. Spindle: VERTICAL LEFT Engine with electronic brake 7.5 kW (10 hp) Diameter 40 mm Spindle length 170 mm Adjustment distance axial 60 mm Standard profile deepth 20 mm Quick nut "Pro-Lock" 4. Spindle: HORIZONTAL UP Motor with electronic brake 7.5 kW (10 hp) Diameter 40 mm Spindle length 240 mm Adjustment distance axial 20 mm Standard profile deepth 20 mm Pressure shoe pneumatic, through linear guides dynamically adjustable Quick nut "Pro-Lock" 5. Spindle: HORIZONTAL BOTTOM Engine with electronic brake 5,5 kW (7.5 hp) Diameter 40 mm Spindle length 240 mm

  • Термопластавтомат WINDSOR 1000-2890
    • Фиксированная цена

    Windsor 1000-2890

    Германия | Kirchen (Sieg)


    WINDSOR W 1000-2890 Injection Moulding Machine - working hours 208200 - connection power 202 kW - normal capacity (pump) 55 kW - clamping force 530 kN - clamping unit power 530 kN - clamping plates 1630 x 1570 mm - clamping unit distance 1700 mm - min. tool installation height 300 mm - max. opening width 2000 mm - ejector stroke 250 mm - ejector power back/forth 235/120 kN - screw diameter 80 mm - max. spray pressure 1800 bar - max. swept volume 1600 ccm - max. firing speed (PS) 1150 gr. - max. screw speed 230 rpm - nozzle contact force 120 kN - barrel heating zone 6 - Extra: - robot interface - material conveyor - 2 x pneumatic core pull - etc. For further details see pictures

  • HAKO-JONAS 1500 D Ride-On Sweeper Machine
    • Фиксированная цена

    HAKO-JONAS 1500 D

    Германия | Duisburg


    Typ: ECR-005228-0032 immediately ready for use incl spar brush for further details see pictures

  • Горизонтальный обрабатывающий центр HITACHI SEIKI HG 500
    • Фиксированная цена

    Hitachi Seiki HG 500

    Венгрия | Budapest


    HITACHI SEIKI HG 500 Horizontal Machining Centre - Machine no. HG 50336 - x-travel 710 mm - y-travel 680 mm - z-travel 600 mm - Control: Fanuc 15-M - Tools: BT 50 - Magazine: 60 pieces - Spindle nose: NT 50 - Spindle change speed: fully automatic and stepless - Spindle speed: 20 ~ 45000 - Table dimensions: 500 x 500 - Table: 360x1° - Synchronous operation

  • BRUNNHUBER HSP 50 AZ 5x5 90 RF Hydraulic Deep Drawing press
    • Фиксированная цена

    Brunnhuber HSP 50 AZ

    Германия | Gammertingen


    Pressure 50 t Distance between columns 600 m Stroke 750 mm Daylight 1050 mm Cushion stroke 20 mm Ejector pressure 2,5 t Table surface area 500 x 500 mm Ram surface area ca. 500 x 500 mm Approach speed 600 mm/s Return speed 600 mm/s Working speed 34 - 85 mm/s Oilvolume ca. 600 L

  • Горизонтальный обрабатывающий центр HITACHI SEIKI HG 500 II
    • Фиксированная цена

    Hitachi Seiki HG 500 II

    Венгрия | Budapest


    HITACHI SEIKI HG 500 II Horizontal Machining Centre - Machine no. HG 52046 - x-travel 760 mm - y-travel 700 mm - z-travel 650 mm - Control: Fanuc 15-M - Tools: BT 50 - Magazine: 60 pieces - Spindle nose: NT 50 - Spindle change speed: fully automatic and stepless - Spindle speed: 20 ~ 6000 - Table dimensions: 500 x 500 - Table: 360x1°

  • CATTELAN/GANN/BOTTENE KVH Plant
    • Фиксированная цена

    CATTELAN/GANN/BOTTENE KVH Plant

    Германия | Fuchstal


    KVH plant for the production of structural timber. The minimum cross section is 45 x 80 mm and the maximum 120 x 240 mm. The production capacity is about 35 cubic meters a day at a cross-section of 80 x 160 mm. The system consists of the following sections (see installation plan): 1 Package infeed area with manual labelling station 2 Moisture measuring device by GANN 3 Automatic cross-cut saw by BOTTENE, type: TP 600, Y.o.m. 1991 4 Finger jointing line by CATTELAN, type: MPX, Y.o.m. 2000 5 Lateral transfer for curing to the planer, 9-stranded, length: 2 x 8000 mm, width: 9000 mm 6 Planer by CATTELAN, type: KSA 600S4, Y.o.m. 2004 3 additional jointing kits for finger jointing line Installation area approx 49000 mm x 23000 mm Loading dimensions approx. 10 trucks. For further details, please see PDF and video.

  • WEEKE Profiline ABS 110 Special Fronts CNC Boring-Press-Machine Center
    • Фиксированная цена

    Weeke Profiline ABS 110

    Германия | Duisburg


    Top maintained WEEKE Profiline 110 ABS special fronts CNC boring-press-machine center for furniture fronts with vertical drilling up/down, pressing of hinges - drawer adapters and millings for handle shells. Specifications: 1.1 workpiece dimensions hinged doors (front height 190-2400 mm, front width 190-700 mm, workpiece thickness 16 - 25 mm) 1.2 workpiece dimensions with drawer / pull front pieces (front width 190-1200 mm, front height 100 - 700 mm, 16 - 25 mm) 1.3 workpiece dimensions at fronts for pharmacists cabinets (front height 750-2400 mm, front width 190-395 mm, workpiece thickness 16 - 25 mm) vertical drilling unit with 3 spindles from the top in 32 mm grid vertical drilling unit with 7 spindles of the bottom of the 32 mm height vertical drilling with 3 spindles for fitting routers 2 pieces with motor 6 KW and ETP clamping system with pressing-feed magazine for hinges 107 ° / 170 ° pressing-and vibratory conveying device for drawer Adapter

  • OTT M 259-FÜ ÐšÑ€Ð¾Ð¼ÐºÐ¾Ð¾Ð±Ð»Ð¸Ñ†Ð¾Ð²Ð¾Ñ‡Ð½Ñ‹Ð¹ станок with Return coneying system
    • Фиксированная цена

    Ott GmbH M 259-FÜ

    Германия | Duisburg


    OTT M259FÜ Edgebanderwith te following equipment:1. pre-milling unit 2 x 1.5 HP2. automatic cutting device 0,2 - 3 mm3. Doble-end trmming unit 2 x 0,6 kW4. Top and bottom trim station5. Fine trimming station for to/bottom bevel trimming 0 - 3 mm6. Radius trim station 2 x 0,6 HP, swiveable 0-45°7. corner rounding station 4 x 0,35 kW8. Scraping unit 3 mm radius9. Buffing unit10. return conveying system Ligmatech Boomerang ZHR15Please note that the date of delivery is an expected date that depends on the delivery of a new machine!

  • Робот FANUC R2000iB/210F
    • Фиксированная цена

    FANUC R2000iB/210F

    Нидерланды | Brunssum


    FANUC R2000iB/210F Industrial Robot Tested Industry robot Manufacturer: Fanuc Type R-2000iB /210F Axes : 6 Payload : 210 kg Control type : R-J3iC The control cabinet is equipped with profibus I/O and Slave cards. The robot features 2 customers connectors for extra use. It is in a good to very good condition (between 3000-6000 operating hours). We would like to demonstrate you the robot under power ! The delivery includes : Jointed-arm robot Suitable control cabinet Teach pendant Cable set 1 Documentaion on a CD

  • PAROLAI Tool Cabinet with Contents
    • Фиксированная цена

    PAROLAI Tool Cabinet with Contents

    Франция | Acquigny


    1st drawer 8 punches with hexagonal or special forms, with various dies, 2nd drawer 9 punches with spring dies, 3rd drawer with heavy punches with guide and dies, rectangular holes, 3-point punches, 1 drawer with approx. 30 dies for rectangular holes, 5 dies, 1 drawer with assortment sheets for insertion of tools, 1 drawer with punches and dies and guides, round, square, special forms, 1 drawer with punches and dies, square, slotted holes, round, with guides, partly heavy designs, see photos for details

  • Вертикальный обрабатывающий центр ALZMETALL AC 28 CNC
    • Фиксированная цена

    Alzmetall AC

    Германия | Laasdorf


    ALZMETALL AC 28 CNC Vertical Machining Centre Tooling:15 Span-to-chip time approx 12 seconds Threaded sync, no compensating chuck required Also for light milling work Documentation: completely available The machine has a serial interface RS-232-C (V24) Program memory is battery-buffered and has a storage capacity of 110 kByte This corresponds to e.g. 100 programs each with 20 program steps, 100 coordinate sets With 10 coordinates as well as 1061 tool sets Optionally, the program memory can be extended by 128 kB by means of RAM expansion

  • PITTLER Petra 1-200/2-2 Front turning machine
    • Фиксированная цена

    Pittler Petra 1-200/2-2

    Германия | Laasdorf


    PITTLER Petra 1-200/2-2 Lathe Number of Spindles 2 Diameter 260 mm Turning length 200 mm Tip height 160 mm Travel distance - z 270 mm Feed Z, 0-12000 mm / min Circulating diameter 320 mm Travel distance - x 335 mm Control system SINUMERIK 3T Workpiece spindle speed 140 -4.000 min - 1 Starrevolver 2 Tool 8 Loading swivel loader Speed ​​range: Toolsp. 250 -3150 min -1 Accessories and equipment: oil mist separator, chip conveyor Total power requirement 30 kW

  • TRUMPF TRUMATIC 5000 R Punching Machine
    • Фиксированная цена

    TRUMPF Trumatic

    Австрия | Zistersdorf


    Serial number A0060A0687, max. Cutting force 220 kN, connection capacity 29 kVA, operating range 2500 x 1250 mm, max. To punching sheet thickness 8 mm, active holding-down device (programmable in steps), 4.5 - 20 kN, max. Workpiece weight 230 kg, speed X-axis 100 m / min, Y-axis 60 m / min, simultaneous (X and Y) 116 m / min, C axis 330 rpm, max. Stroke sequence punching (E = 1), 1000 strokes / min., Max. Stroke sequence Signing approx. 2800 strokes / min., Max. Acceleration X axis 18 m / sec, Y axis 9 m / sec, C axis 350 strokes / sec, Tools: Line magazine 21 tools with 4 claws, number for use Multitool 21 - 210 tools, multitool 5 / 10fold , Tool changing time for individual tools approx. 3 sec., Control SIEMENS Sinumerik 840 D, programmable parts flap at max. Part size 500 x 500 mm, space requirement including safety barrier 7600 x 7000 mm, dimensions machine body 6350 x 6150 x 2450 mm, control panel 800 x 700 x 1350 mm, 4 x light barrier 500 x 300 x 1060 mm, double door tool cabinet

  • Горизонтальный обрабатывающий центр HECKERT CWK 400 D
    • Фиксированная цена

    WMW Heckert CWK 400 D

    Германия | Laasdorf


    HECKERT CWK 400 D Horizontal Machining Centre - Machine number 18216 - with magnesium extinguishing system - Spindle speed 15000 rpm - Chip conveyor (KNOLL K-1/150) - Coolant filter system - Positioning assurance 10 µm - Seperate clamping point - including accessories, tools and tool holders For further details see pictures

  • Круглошлифовальный станок CNC Universal TSCHULDIN SL 105 U
    • Фиксированная цена

    HAUSER TRIPET TSCHUDIN SL 105 U

    Германия | Waiblingen


    ATTENTION: Machine is still in operation and available on the 1st of April 2017 at the earliest. Machine has to be dismantled, loaded and picked up at location until 25.04.2017 latest! used CNC-Universal Cylindrical Grinder serial no.: 390094 travel distances: X 340 mm Z 1400 mm B 300° headstock spindle: movability + 30° / - 90° transverse slides swivel range: tool table + 9° / - 9° working area: max. grinding length: 1000 mm max. grinding diameter with full grinding wheel: 348 mm min. grinding diameter with worn grinding wheel: 1 mm inside grinding diameter: 8 - 220 mm max. grinding wheel diameter L: 500 mm max. grinding wheel diameter R: 300 mm max. grinding wheel diameter inside: 120 mm max. grinding wheel width L: 100 mm max. grinding wheel width R: 50 mm max. grinding wheel width inside: 50 mm max. workpiece's weight: 120 kg speed range main spindle: speed range work headstock: 20 - 800 l/min wheel peripheral speed L: 45 m/s Wheel peripheral speed R: 27 m/s range of feeds X-, Z- a

  • Обрабатывающий центр с ЧПУ BIESSE Rover A 2231 G FT NESTING
    • Фиксированная цена

    Biesse ROVER

    Португалия | Arcos de Valdevez


    BIESSE Rover A 2231 G FT Nesting CNC Machining Center in top condition consisting of: scisoors lifting table for max. opanel size 3100 x 2200 mm, load max. 3000 kg, with automatic label printing and apllication device, swiveable 0-90°, measuring system for panels, panel pusher for transfer of panels to machine. CNC Machining Centre BIESSE Rover A 2231 G FT with technical specs as mentiond above, with PC Control (Windows 7) with Biesse Works and Biesse Nest Software incl. 2 license for office PC take-out conveyor belt with dust exhaust and light barrier 2 additional conveyor belts each with brush and light barrier This machine is connected to a BARGSTEDT Panel Strorage which can be purchased separately (see item no. 363978)

  • AKO 250 Hydraulic Pipe Bending Unit
    • Фиксированная цена

    AKO 250

    Германия | Falkenberg/Elster


    Serial number: 254-80099, motor power 1.5 kW, with accessories

Инфо-рассылка "Surplex"

Подпишитесь и получайте обновления о новых продуктах. НЕ СПАМ!

Ура! Подписка выполнена успешно.

Ура! Чтобы подтвердить Вашу подписку, нажмите на ссылку, которую мы отправили в электронном письме.

Формат продаж

Дайте оценку этому дилеру!

3,8 (11)
Спасибо!
Вы уже дали оценку.
Оценка недоступна. Повторите попытку позже.